Function as the main lights on the car lights the direction that we want to go through. In addition to also be a sign language with the vehicle from the front. Fuss, if the glow was not optimal so that distraction while driving.
The solution, replace the bulb. But, now offered by many electric power and color variety. So that no one chose, here are four directions.
1. Adjust power bulb with original components so that the condition of the headlamp, especially those that use plastic materials remain in good condition. Greater light power to make the temperature inside the headlamp is getting hot. Characteristics, colors begin to turn yellow.
Power headlight also requires the use of electric cables-as-a great conductor of heat. If the condition is not good, most likely a hot wire and prone electrical short circuit.
2. Choose a neutral color because there are yellow and bluish white. The sign, of degrees kelvin specifications on the packaging. The higher the number, the more its light bluish white.
The problem, if it rains, the rays can not penetrate. Under such conditions it has benefited from use yellow light bulb. The fog was impenetrable. Only, if normal weather will interfere with other riders.
To obtain the optimum beam, both under normal conditions, rain or fog, select the number range of 4,000 degrees -5000 degrees Kelvin.
3. Note the grounding, replacing large power bulb to get more light beam. But, still not optimal due to grounding or negative current supply to the bulb. especially if the cable over the age of 5 years, should replace the aftermarket is already equipped with relay.
4. Rubber seals should be completely covered so that dust and water do not break through. Characteristics, headlamp fogged or dirty. If ignored could arise mold and air holes are also considered not to point upwards so that the lamp is easy intruding water.
